Configurators for metal fabricators, with workshop files.
I am Dennis Vercauteren, an engineer. I build configurators for steelwork, sheet metal and stainless. Your customer picks sizes and options and gets a price and a quote straight away. From the same choice, your workshop gets the STEP, the DXF flat patterns and the parts list.
Straight, L or U, solved from the floor height, checked against EN ISO 14122-3 and priced from its cut lists.
Configure: Steel staircase
Draw the floor edge with corners and arcs. Bars, glass or cables, checked against NBN B 03-004.
Configure: Balustrade
A bolted cabinet of square steel tube, every shelf checked for load and the bolt kit listed.
Configure: Frame cabinet
A handle-less wall broken open by a field of boxes. The configurator lays out the grid and prices every plate.
Configure: Irregular cabinet wall
Plywood ribs slotted into two rings. Draw the profile, pick the wood and the ribs, get a flat-pack kit.
Configure: Laser-cut lamp shade
Made to measure, with folded edges, sinks, tap holes and power sockets.
Configure: Stainless worktop
Cone, hopper or square-to-round, with the top off centre if needed and a flange at either end.
Configure: Sheet metal transition
Plate or blind flange to EN 1092-1, straight from the standard's table.
Configure: DIN flangeMake something like this? Send me your product.
Send your product or three quotes from last year. Within a week you get a proposal with a fixed price. The scan is free.