A flange, straight from the standard's table.
Your customer picks a plate flange or a blind flange, the nominal size and the pressure rating. The sizes come from the standard's table, not from a drawing someone has to look up.
Standard: EN 1092-1
Open the live configurator (opens in a new tab) Request a product scan
01—What your customer chooses
- Plate flange or blind flange.
- The nominal size and the pressure rating.
02—What your workshop gets
- The STEP of the flange.
- The DXF for the laser.
- For your customer: the price and a PDF quote.
03—To EN 1092-1
Outside diameter, bolt circle, number and size of bolt holes and thickness come from the table in the standard. A combination that is not in the table cannot be chosen.
04—More configurators in this trade
Plywood ribs slotted into two rings. Draw the profile, pick the wood and the ribs, get a flat-pack kit.
Configure: Laser-cut lamp shade
Cone, hopper or square-to-round, with the top off centre if needed and a flange at either end.
Configure: Sheet metal transition05—Contact
Make something like this? Send me your product.
Send your product or three quotes from last year. Within a week you get a proposal with a fixed price. The scan is free.